Start a project
  1. Home
  2. Test & Assess
  3. Test catalog

Test & equipment catalog

Every test, one search away.

92 analyses, tests and pilot capabilities with the standard method, typical lead time and where the work happens. Filter by category or show only tests on our ISO 17025 scope.

Catalog summary
Tests & capabilities92
Categories17
On ISO 17025 scope12
Run in MPI’s own lab75

92 of 92 tests and capabilities

Spectroscopy

  • Fourier Transform Infrared Spectroscopy (FTIR) with ATR

    ATR or transmission of a liquid or solid sample

    Near-IR and Raman, wide-range Bruker Vertex 80v FTIR

    Standard
    E1252, E1421
    Lead time
    1–3 days
    Location
    MPI lab
    ISO 17025
  • IR Microscopy

    IR spectrum and analysis with IR microscope

    Standard
    D5477
    Lead time
    5–10 days
    Location
    MPI lab
  • Raman Microscopy

    Raman spectroscopy of a microscopic sample, very useful for graphene testing

    Standard
    E3220
    Lead time
    3–5 days
    Location
    MPI lab
  • Nuclear Magnetic Resonance (NMR)

    Solution and solid state, 80–600 MHz, 4 nuclei systems (1H, 13C, 19F, 31P)

    80 & 400 MHz at MPI; other nuclei, 2D, ROSY, COSY, etc.

    Standard
    Custom
    Lead time
    10–20 days
    Location
    MPI lab
  • Mass Spectrometry (MS)

    See GC/MS and LC/MS

    Requires campus involvement

    Standard
    Custom
    Lead time
    15–20 days
    Location
    USM campus
  • Laser Diffraction Infrared Spectroscopy (LDIR)

    Analysis of microplastics

    Standard
    Custom
    Lead time
    10–20 days
    Location
    MPI lab
  • UV-Vis

    Absorbance vs. wavelength, 190–840 nm

    Standard
    Custom
    Lead time
    3–5 days
    Location
    MPI lab

Metals & inorganics

  • ICP-OES

    Inductively coupled plasma optical emission spectrometry

    Standard
    Custom
    Lead time
    5–10 days
    Location
    MPI lab
  • Energy Dispersive X-ray (EDX) Elemental Analysis

    Energy dispersive X-ray elemental analysis

    Standard
    Custom
    Lead time
    3–5 days
    Location
    USM campus

Microscopy

  • Scanning Electron Microscopy (SEM) with EDX

    Electron microscopy digital imaging; elemental weight percent via EDX

    Standard
    Custom
    Lead time
    3–5 days
    Location
    USM campus
  • Imaging Analysis

    Particle size and distribution

    Standard
    Custom
    Lead time
    10–20 days
    Location
    MPI lab
  • Keyence VHX 7000 Digital Microscope

    Light microscope with digital imaging, depth profiling and 3D capabilities

    3D imaging, topography, optical shadow mode, fluorescence, polarizing light, layer and thickness analysis

    Standard
    Custom
    Lead time
    2–3 days
    Location
    MPI lab

Rheology & viscosity

  • Viscometry

    Intrinsic viscosity using Cannon-Fenske or Ubbelohde viscometers

    Standard
    Custom
    Lead time
    7–10 days
    Location
    MPI lab
  • Viscosity (Stormer)

    Stormer viscometer

    Standard
    D562
    Lead time
    7–10 days
    Location
    MPI lab
  • Viscosity (Brookfield)

    Brookfield DV-I+ viscometer (Pa·s) with spindles 1–7

    Other viscometer models and spindles

    Standard
    D2196
    Lead time
    7–10 days
    Location
    MPI lab
  • Viscosity (inherent)

    Inherent viscosity using Ubbelohde

    Standard
    Custom
    Lead time
    7–10 days
    Location
    MPI lab
  • Rheology

    Cone and plate or parallel plate

    Requires campus involvement

    Standard
    D7395
    Lead time
    7–10 days
    Location
    USM campus

Separations

  • HPLC with RI, UV-Vis and ESI detectors

    Identification and separation of chemical components using reverse phase-C18 columns with gradient solvent setup

    Solvents include acetonitrile, isopropanol, water and THF. Often requires sample prep or method development.

    Standard
    Custom
    Lead time
    5–10 days
    Location
    MPI lab
  • Gel Permeation Chromatography (GPC)

    Relative molecular weight determination using polystyrene standards

    Requires campus involvement

    Standard
    Custom
    Lead time
    5–10 days
    Location
    USM campus
  • Molecular Weight Distribution / Size Exclusion Chromatography

    GPC with absolute molecular weight of a liquid or solid sample soluble in THF

    Requires campus involvement

    Standard
    Custom
    Lead time
    5–10 days
    Location
    USM campus
  • Gas Chromatography–Mass Spectrometry (GC/MS)

    Gas chromatography with mass spectrometry

    Requires campus involvement

    Standard
    Custom
    Lead time
    15–20 days
    Location
    USM campus
  • Liquid Chromatography–Mass Spectrometry (LC/MS)

    MS ion trap LC

    Requires campus involvement

    Standard
    Custom
    Lead time
    15–20 days
    Location
    USM campus

Particle size

  • Particle Size Analysis, wet/dry

    Particle size of a liquid or powder sample and/or zeta potential

    In water, in solvent or dry; zeta potential

    Standard
    Custom
    Lead time
    7–10 days
    Location
    MPI lab
  • SEM or Light Microscopy Particle Size Analysis

    Digital imaging and analysis

    Standard
    Custom
    Lead time
    7–10 days
    Location
    USM campus

Thermal analysis

  • Differential Scanning Calorimetry (DSC)

    Melt temperature and/or glass transition temperature of a solid (modulated DSC available)

    Modulated DSC, nitrogen or oxygen environments, multiple pan selections

    Standard
    D3418
    Lead time
    3–5 days
    Location
    MPI lab
    ISO 17025
  • Thermogravimetric Analysis (TGA)

    Degradation temperature and residual ash content

    E1131, TGA-MS and TGA-IR

    Standard
    D3850
    Lead time
    3–5 days
    Location
    MPI lab
    ISO 17025
  • Dynamic Mechanical Analysis (DMA)

    Temperature ramp at set frequency using cantilever beam

    D5023, D5024, D5026, D5418, D7028, E1640

    Standard
    D4065
    Lead time
    3–5 days
    Location
    MPI lab
    ISO 17025
  • Thermomechanical Analysis (TMA)

    Coefficient of linear thermal expansion

    E1545, E1824, E2347

    Standard
    E831
    Lead time
    3–5 days
    Location
    MPI lab
    ISO 17025

Wet chemistry

  • Titrations

    Titration for OH or acid number in duplicate; AV reported in mg KOH/g of sample (depends on solubility)

    Standard
    E2222
    Lead time
    7–10 days
    Location
    MPI lab
  • Fractional Distillation

    Multi-solvent fractionation

    Standard
    Custom
    Lead time
    7–10 days
    Location
    MPI lab
  • Extractions

    Grinding and boiling in solvent

    Standard
    Custom
    Lead time
    7–10 days
    Location
    MPI lab
  • Dissolutions

    Dissolving polymer materials

    Standard
    D5226
    Lead time
    Ask us
    Location
    Ask us
  • pH

    pH meter with probe, calibrated with two standards depending on sample pH

    Standard
    E70
    Lead time
    2–5 days
    Location
    MPI lab

Physical & mechanical

  • Melt Flow (Tinius Olsen Extrusion Plastometer)

    Melt density, viscosity, volume rate and flow rate of a pelletized solid

    Melt flow of PVC, ASTM D3364

    Standard
    D1238
    Lead time
    7–10 days
    Location
    MPI lab
    ISO 17025
  • Impact

    IZOD or drop impact testing

    Standard
    D256, D5420, D4812
    Lead time
    3–5 days
    Location
    MPI lab
    ISO 17025
  • Physical Testing: plastics, films, fabrics, composites, rubbers

    Tensile strength with or without video extensometer, compressive properties, 3-point bend/flexural, tear and peel testing

    Also D412, D470, D732, D882, D955, D3846, D3518, D5379, D6252, D6862. Often requires sample prep or method development.

    Standard
    D638, D790, D695, C297, D5868, D624, D3039, D1002, D2344
    Lead time
    7–10 days
    Location
    MPI lab
    ISO 17025
  • Density and/or Specific Gravity

    Specific gravity via water displacement

    Standard
    D792
    Lead time
    3–5 days
    Location
    MPI lab
    ISO 17025
  • Residual Ash Content

    Residual ash content of plastics or composites

    Standard
    D2584, D5630
    Lead time
    Ask us
    Location
    MPI lab
    ISO 17025
  • Moisture Absorption

    Moisture absorption testing

    ISO-accredited for D570

    Standard
    D5229, D570
    Lead time
    Ask us
    Location
    MPI lab
    ISO 17025
  • High-speed Puncture / Instrumented Impact

    Instrumented impact of panels

    Requires campus involvement

    Standard
    D3763
    Lead time
    Ask us
    Location
    USM campus
  • Abrasion Resistance

    Taber abrasion

    D3389 for fabrics

    Standard
    D1044, D4060
    Lead time
    7–14 days
    Location
    MPI lab
  • Hardness Testing

    Shore A and D hardness

    Standard
    D2240
    Lead time
    3–5 days
    Location
    MPI lab
  • Coefficient of Friction (CoF)

    Sample on sled across aluminum

    Standard
    D1894
    Lead time
    7–10 days
    Location
    MPI lab

Coatings

  • Minimum Film Formation Temperature (MFFT)

    Film formation from a liquid sample

    Standard
    D2354
    Lead time
    3–5 days
    Location
    MPI lab
  • Colorimetry

    CIE L*a*b* color measurements; yellowness and whiteness index

    Standard
    D2244
    Lead time
    3–5 days
    Location
    MPI lab
  • Gloss

    Gloss at 20, 60 and 85 degrees; gloss, sheen or flat surface appearance

    Standard
    D523
    Lead time
    Ask us
    Location
    MPI lab
  • Opacity

    Hiding power of coating

    Standard
    D2805
    Lead time
    Ask us
    Location
    MPI lab
  • Coatings Tests

    Scrub resistance, pencil hardness, MEK double rubs, Konig hardness and more

    D660, D661, D714, D1308, D1544, D2486, D4752, D4828

    Standard
    Custom
    Lead time
    Ask us
    Location
    MPI lab
  • Sag Test

    Coatings sag testing

    Standard
    D4400
    Lead time
    Ask us
    Location
    MPI lab
  • Film Thickness

    Dry film thickness

    Standard
    D1005, D7091
    Lead time
    Ask us
    Location
    MPI lab
  • Density of a Liquid

    Weight per gallon cup

    Standard
    D1475
    Lead time
    Ask us
    Location
    MPI lab
  • Constituent Content

    Non-volatiles by mass and by volume

    Standard
    D2369, D2697
    Lead time
    Ask us
    Location
    MPI lab
  • Oil Absorption of Pigments

    By spatula rub-out

    Standard
    D281
    Lead time
    Ask us
    Location
    MPI lab

Synthesis & formulation

  • Glass Reactors

    25 mL to 50 L

    Standard
    Custom
    Lead time
    On request
    Location
    MPI lab
  • High-Pressure Stainless Steel Reactors

    100 mL to 5 gallons

    Standard
    Custom
    Lead time
    On request
    Location
    MPI lab
  • Mixing Vessels

    Stainless steel and glass mixing tanks, 50–250 gallons

    Standard
    Custom
    Lead time
    On request
    Location
    MPI lab
  • Dual Asymmetric Centrifugal Mixer

    Planetary mixing (100 g–1 kg) for rapid development of coating formulations, resin grinds and air-free mixing

    Standard
    Custom
    Lead time
    On request
    Location
    MPI lab
  • Overhead Mixing / Stirring

    Adjustable speed and torque mixers with a variety of blades to replicate industrial mixing

    Standard
    Custom
    Lead time
    On request
    Location
    MPI lab
  • Product Formulation

    Coatings and more

    Standard
    Custom
    Lead time
    On request
    Location
    MPI lab
  • Contaminant Identification & Deformulation

    Chemical identification using multiple pieces of equipment

    Standard
    Custom
    Lead time
    On request
    Location
    MPI lab

Extrusion & molding

  • Co-rotating Twin-Screw Extruder, 24 mm (ThermoFisher)

    Up to 450 °C; volumetric and gravimetric feed; three top vent ports; solid, liquid and powder feed; three-strand and slit dies; 5 lb minimum batch; up to 1000 RPM

    Standard
    Custom
    Lead time
    On request
    Location
    MPI lab
  • Brabender Prep Center Mixing Head

    150 RPM, 350 mL capacity, 400 °C max, roller-type mixing blades

    Standard
    Custom
    Lead time
    On request
    Location
    MPI lab
  • 85-ton Injection Molder

    6.04 oz shot size, various ASTM molds, up to 800 °F, up to 250 RPM

    Standard
    Custom
    Lead time
    On request
    Location
    MPI lab
  • Formech 686 and 300XQ Thermoforming

    Up to 11×19 and 25×25 inch forming with PVC, PETG, PS and more

    Standard
    Custom
    Lead time
    On request
    Location
    MPI lab
  • Melt Press

    Carver Automated 5492 ASTM hydraulic heated press, 800 °F, 12×12 inch platens, 15 tons

    Standard
    Custom
    Lead time
    On request
    Location
    MPI lab
  • Miniature Injection Molding

    Capable of using 3D-printed molds

    Standard
    Custom
    Lead time
    On request
    Location
    MPI lab
  • Filabot EX2 Mini-Extruder

    Single-screw filament extruder with take-up and cooling; 35 RPM, 5/8 in screw, 12 L/D, 450 °C max, 2 lb/hour

    Standard
    Custom
    Lead time
    On request
    Location
    MPI lab

CAD & scanning

  • CAD Design

    SolidWorks and Fusion 360

    Standard
    Custom
    Lead time
    On request
    Location
    MPI lab
  • Laser Scanning

    FARO laser and tracker, ±0.0016 in volumetric precision, portable, complex and large components

    Standard
    Custom
    Lead time
    On request
    Location
    MPI lab

Additive manufacturing

  • UV-Cure and FDM 3D Printing

    Multi-modulus materials, many materials and colors, medium to large format parts, high resolution

    Standard
    Custom
    Lead time
    On request
    Location
    MPI lab

Biodegradation

  • Disintegration

    Disintegration of plastics under pilot-scale composting conditions; part of the BPI compostable certification scheme

    Standard
    ISO 16929
    Lead time
    3 months
    Location
    MPI lab
  • Respirometer

    Aerobic biodegradation under composting and marine conditions; anaerobic setup with nitrogen available; minimum 200 g sample

    ASTM D5338 is part of the BPI testing scheme

    Standard
    D5338, D6691
    Lead time
    3–6 months
    Location
    MPI lab
  • Ecotoxicity

    Effects of a test sample on seedling emergence and early growth

    Standard
    OECD 208
    Lead time
    3 months
    Location
    MPI lab

Weathering & degradation

  • QUV Accelerated Weathering

    Controlled UVA or UVB range, temperature, irradiance and condensation

    Imaging and color change recommended

    Standard
    G154
    Lead time
    On request
    Location
    MPI lab
  • Salt Fog (QFOG)

    Corrosion testing in salt spray cabinet

    Imaging and color change recommended

    Standard
    B117
    Lead time
    On request
    Location
    MPI lab
  • Xenon-Arc (QSUN)

    Cyclic 4 h on at 340 nm, 0.35 W/m², 63 °C, 35% RH with daylight filter, then 1 h off at 40 °C, 35% RH

    Imaging and color change recommended

    Standard
    G155
    Lead time
    On request
    Location
    MPI lab
  • Temperature & Humidity Cycling

    Sealed 32 ft³ chamber cycling −68 °C to 180 °C and 10–98% RH

    Standard
    Custom
    Lead time
    On request
    Location
    MPI lab
  • Temperature Exposure

    Programmable forced-convection ovens, 30 °C to 210 °C

    Standard
    D5510
    Lead time
    On request
    Location
    MPI lab
  • Corrosion Testing

    Potentiodynamic polarization resistance and corrosion rates; corrosion from immersion by mass loss

    Standard
    G59, G31
    Lead time
    On request
    Location
    MPI lab
  • Chemical Degradation (standard or custom)

    Soaking, dipping and more with titrations and pH monitoring

    Imaging and color change recommended

    Standard
    Custom
    Lead time
    On request
    Location
    MPI lab

Other

  • X-ray Diffraction (XRD)

    Crystallinity information

    Standard
    Custom
    Lead time
    Ask us
    Location
    MPI lab
  • Electrical Conductivity

    In-plane conductivity of a solid sample

    Standard
    Custom
    Lead time
    Ask us
    Location
    MPI lab
  • Thermal Conductivity

    Thermal conductivity

    Standard
    D7984
    Lead time
    Ask us
    Location
    MPI lab
  • AFM (incl. Cypher Asylum Research AFM and AFM-IR)

    Atomic force microscopy

    Requires campus involvement

    Standard
    Custom
    Lead time
    Ask us
    Location
    USM campus
  • Permeability

    Perm cup measurements

    Standard
    E96
    Lead time
    Ask us
    Location
    MPI lab
  • Specialty Sample Preparation

    Cutting, measurements, machining and more

    Standard
    D6287
    Lead time
    Ask us
    Location
    MPI lab
  • Conditioning Materials for Testing

    Environmental conditions, temperature, %RH

    Standard
    D618
    Lead time
    Ask us
    Location
    MPI lab
    ISO 17025
  • Cyclic and Fatigue Testing

    Requires campus involvement

    Standard
    Custom
    Lead time
    Ask us
    Location
    USM campus
  • SAXS / WAXS (Xenocs)

    X-ray scattering

    Requires campus involvement

    Standard
    Custom
    Lead time
    Ask us
    Location
    USM campus
  • Vapor Sorption Analyzer

    Requires campus involvement

    Standard
    Custom
    Lead time
    Ask us
    Location
    USM campus
  • ThermoScientific ESCALAB Xi+ XPS

    X-ray photoelectron spectroscopy

    Requires campus involvement

    Standard
    Custom
    Lead time
    Ask us
    Location
    USM campus
  • Bruker Microflex MALDI-ToF with PSD

    Requires campus involvement

    Standard
    Custom
    Lead time
    Ask us
    Location
    USM campus
Notes

Lead times are typical and subject to change.

“USM campus” tests use instruments in the School of Polymer Science & Engineering. Many physical tests and HPLC work need sample prep or method development first. Don’t see your method? We add new ones often.

Request a quote

Work with MPI

Bring us your hardest materials problem.

Call
601.266.4607
Email
info@thepolymerinstitute.com
Visit
46 Shelby Thames Drive, Hattiesburg, MS
Hours
Mon–Fri, 8 AM–5 PM CT